THOR GIDEON SHADOW 9mm Roller Lock Pistol

The THOR Gideon Shadow pistol is recoil operated, closed bolt, lightweight, durable and easy to maintain semi auto pistol. The THOR Gideon built for easy conversion and can fire three calibers: 9mm, .40S&W  and .45 ACP. The THOR Gideon Shadow pistol receiver is made from high impact glass reinforced polymer. The THOR Gideon Shadow pistol comes with 1 magazine and a soft case. Built by THOR Global Defense Group. Ask about Tactical rails, SB Tactical Brace and Optic upgrades.

• This is the 9MM model built with a combination of original UMP and US parts .
• Made from high impact reinforced polymer and steel components
• End user can swap caliber kits in a matter of minutes in the field, no gunsmithing required
• Caliber conversion kits are available on the market in 3 calibers 9mm, .40 & .45
• 9mm & .40 calibers use 30 round & 15 round readily available magazines
• .45 caliber use 25 round and 15 round readily available magazines
• Simple to assemble and service NO gunsmith needed
• Superior materials and ergonomics
• Accepts folding UMP stocks or pistol braces
• Accepts either German HK UMP or USA made parts  & accessories
• 3-lugged & threaded 16x1 Barrel for mounting Muzzle attachments or suppressors
• Integrated hard mounted point for the addition of the optic rail
• Integrated tri-rail mounting points for lasers, lights and grips, Rails sold separately
• Hand stop with ambidextrous sling attachment points
• Tool less disassembly and ease of cleaning pistol

General Technical Information Semi-Auto Firing System
Caliber	9x19mm/.40 S&W/.45ACP
Operating principle	Recoil Operated
Magazine capacity  9x19mm / 40 S&W 45 ACP	30 rounds 25 rounds
Modes of fire	0-1
Rate of fire	approx. 600/min
Sights	Flip Up
Buttstock	Side Folding Arm Brace
Dimensions
Length min./max.	approx.  mm  inch
Width	approx. 69.0 mm 2.72 in
Height     9x19mm 40S&W 45 ACP	approx. 280mm 11.020in 305 mm 12.01 in 327 mm 12.87 in
Barrel length	approx. 200 mm 7.87 inch
Sight radius	approx. 325.0 mm 12.80 inch
Weight
Weapon     9x19mm 40 S&W 45 ACP	approx.  2350 g 5lbs 2.89 oz 2380 g 5lbs 3.95 oz 2470 g 5lbs 7.13 oz
Magazine      9x19mm 40 S&W 45 ACP	approx. 150 g 5.29 oz 180 g 6.35 oz 170 g 6.00 oz

THOR GIDEON SHADOW PISTOL 9MM .The Gideon Shadow is a straight blow back closed bolt weapon that can easily be converted between 9mm, 40 cal and 45 ACP with just the change of the barrel, bolt and magazine. No other parts of the gun have to be changed or replaced to change the caliber. The pistol has a 7.87" barrel length weighing in at about 5 lbs. total weight, magazine unloaded. The receiver has an integrated rear hinge for a folding stock / arm brace. There is a rear sling attachment point on the left side of the weapon making for convenient  single point sling attachment. With the front finger guard it allows for a two point sling attachment. The Gideon Shadow receiver is made of a high grade glass filled nylon giving it not only high strength but as well as giving it toughness, helping it to resist fractures and brakes if dropped. This platform provides 935 ft/s (45 ACP) with an effective range of 100 m in 9mm and 65 m in 45 ACP. The feeding system is a 30 round magazine for the 9mm and 40 cal and a 25 round magazine for the 45 ACP. The 40 cal and 45 ACP both have a straight box magazine while the 9mm has a curved box magazine. All three magazines lock into the same lower. The barrel is easily changed while being held in with only a barrel pin. The lower is held into place with one rear push  pin. The front of the lower is locked into position with a molded in swing down in the receiver. There is no head spacing required like in the roller lock platform. The lower has a last round hold open device locking the bolt open when the magazine is emptied. With a quick jab of your thumb after inserting a new magazine the bolt closes and primes the chamber with a live round. It is simple and efficient and now wasted movement.There is no gunsmithing necessary for this weapon. There are no special tools needed for assembly or disassembly. With the use of the quick change barrel pin, made by THOR, the entire weapon can be disassembled down to the bare receiver, including the removal of the barrel. Making for ease of cleaning of all internal parts including the barrel. There are brass threaded inserts molded into the receiver allowing for attachment of two front side rails (for lasers and flashlights), a front bottom rail and a top scope rail.